Show simple item record

dc.contributor.authorDávila Martín, José Miguel 
dc.contributor.authorFortes Garrido, Juan Carlos 
dc.contributor.authorJaramillo-Morilla, Antonio
dc.contributor.authorTorre Sánchez, María Luisa de la 
dc.contributor.authorPancho Custodio, Rocio
dc.date.accessioned2020-03-19T10:57:57Z
dc.date.available2020-03-19T10:57:57Z
dc.date.issued2019-01-04
dc.identifier.citationJ. M. Davila, J. C. Fortes, A. Jaramillo-Morilla, M. de la Torre, R. Pancho, "Behavior of expanded polystyrene as lightweight filler in retaining walls with intermediate slabs", Latin American Journal of Solids and Structures, Vol. 16, pp. 1-15 (2019), ISSN: 1679-7825es_ES
dc.identifier.issn1679-7825
dc.identifier.urihttp://hdl.handle.net/10272/17603
dc.description.abstractThe present study explores a retaining wall with an intermediate slab. To reduce the lateral earth pressure on the wall, the substitution of part of the soil by blocks of expanded polystyrene (EPS) with high density is proposed, which could result in significant economic savings. Also, the possibility of building the wall elevation with smaller thickness (preexisting wall reinforcement) will be analyzed. To do this, the situation and optimum geometry of the EPS blocks will be studied in detail, besides a study of two scaled models, one without EPS and another with blocks with rectangular distribution. The obtained results allow us to affirm that the reduction in pressure is very significant if the blocks are arranged with the proper geometry and situation over the sliding plane but without eliminating the beneficial effect of the weight of the ground located over the slab.es_ES
dc.language.isoenges_ES
dc.publisherArgentinean Association of Computational Mechanicses_ES
dc.relation.isversionofPublisher’s versión
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 España*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/*
dc.subject.otherStabilityes_ES
dc.subject.otherNumerical analysises_ES
dc.subject.otherExpanded polystyrenees_ES
dc.subject.otherLightweight filleres_ES
dc.subject.otherScale modelses_ES
dc.titleBehavior of expanded polystyrene as lightweight filler in retaining walls with intermediate slabses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherversionhttp://dx.doi.org/10.1590/1679-78254776es_ES
dc.identifier.doi10.1590/1679-78254776
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES
dc.subject.unesco3312.08 Propiedades de Los Materialeses_ES
dc.subject.unesco3312.10 Plásticoses_ES
dc.subject.unesco3305.10 Cimientoses_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución-NoComercial-SinDerivadas 3.0 España
Except where otherwise noted, this item's license is described as Atribución-NoComercial-SinDerivadas 3.0 España

Copyright © 2008-2010. ARIAS MONTANO. Repositorio Institucional de la Universidad de Huelva
Contact Us | Send Feedback |